The following Image is the 12 Volt Main Switches. The Left switch is located on the Starboard side of the boat and shows heat. Its not enough to create a work order for but we know what systems were on and now where those systems are routed to.
The Trim pumps shown here are showing warmer fluid in the left (starboard) unit.
The cooler area is the missing starboard out drive. The bar to the right in the verticle orientation is one of the stands this vessel is sitting on.
In this picture we are standing in front of the boat on the ground shooting backwards into the hull. The Keel blocks are cool as they are having weight pressed upon them and they leach out water. The hull looks unremarkable. No evidence of the hull holding water.
Unable to perform the following testing as the vessel was already winterized and the order did not arrive until the boat was laid up for the winter (in North East Ohio). Our findings show that the hull is in good working order. We found no evidence of water in the hull or electrical problems we will be presenting this client in the report.